Blog.gowifi

Blog.gowifi

logos (other)

Logos

Go Wireless NZ

Tuesday, April 29, 2014

MikroTik RouterBOARD - Missing Wireless Interface


Fault:
Some Routers shipped from MikroTik late last year had an issue were the wireless interface was disabled by default. This is not a hardware fault but merely a software error which can be easily fixed.

Resolution:
This can be fixed by enabling the wireless package under System > Packages and then System > Reboot to reboot the router which will install the wireless package.



4 comments:

  1. i have CCR1009-8G-1S and i have error when i enabled package ppp and reboot router it no enabled after reboot router.

    ReplyDelete
    Replies
    1. Hi there,
      Your ppp package should be enabled by default? ensure you are running the latest version of RouterOS (currently 6.35.1).

      Delete